H25 Horizontal Interlocking
APECS 100 · Horizontal Interlocking System
Overview
H25 interlocking panels run horizontally for a sleek, layered facade on walls and soffits. Panels fix directly to galvanised top hats over a breathable, waterproofed membrane, and are fabricated in zinc, copper or PVDF-coated aluminium.
Uses
- WALL / SOFFIT
Features & Benefits
Technical Specifications
Available in
| Aluminium PVDF coated | Zinc | Copper | |
|---|---|---|---|
| Thickness | Min. 0.8mm | Min. 1.0mm | Min. 0.9mm |
| Panel length | Please consult us at design stage | Please consult us at design stage | Please consult us at design stage |
| Panel width | 100–490mm. Standard width 490mm. | 100–390mm. Standard width 390mm. | 100–390mm. Standard width 390mm. |
| Directions | Horizontal | Horizontal | Horizontal |
System build up
| Wall structure | Must allow top hats to be fixed at min. 900mm centre. |
| Direct support | Top hats, galvanised 1.15mm x 35mm fixed at max. 500mm centre in opposite direction to direction of panels. |
| Underlay | Fully breathable and waterproofed membrane |
| Fixings | Fix interlocking panels to top hats at max. 500mm centre and max 100mm from end of panel. |
Fully designed, build up system
Fully designed cladding system: breathable, waterproofed membrane on the base surface, galvanised top hats, and H25 panels fixed directly to the top hats. Complete with all fixings, flashings, trims and waterproofed details meeting adjoining building materials.
| Warranty | Min. 15 years warranty |
| Materials | H25 interlocking panels available in materials and colours as above. For aluminium, must be 3005 alloy with min. H42 temper. Only PVDF coated aluminium, with a primer and min. two layer paint is suitable for this application. |
| Installation | Recommended and approved installers only |
| Manufacture | CASA System’s state-of-the-art machinery has been specifically developed to work with non-ferrous precious metals. Our manufacturing facility has been purpose-built to roll form, fold, curve and pack materials in accordance with the requirements of these type of metals. Only metals formed in CASA System’s facility form part of the system to ensure full warranty. |
Installation & Warranty
Our systems are designed to be installed by experienced installers we know and trust, and the system warranty (minimum 15 years) applies to installations by CASA-approved installers. Talk to us early about who is installing. If you need an installer, we can recommend one.
Need the material too? We supply the zinc, copper or aluminium for every system we fabricate, so you get the system and the metal from one supplier.
Start your project
Send us your drawings or take-off and we will quote the material and fabrication together. Trade partners get prioritised fabrication.