Standing Seam
APECS 400 · Single Lock Standing Seam
Overview
Single lock standing seam gives long, uninterrupted lines across roofs and walls, and carries through to soffits for a continuous finish. Panels are rollformed to length in our Hornsby workshop from zinc, copper or PVDF-coated aluminium, and panel widths can be adjusted, tapered or curved to suit the design.
Uses
- WALL / SOFFIT / ROOF
Features & Benefits
Technical Specifications
Available in
| Aluminium PVDF coated | Zinc | Copper | |
|---|---|---|---|
| Thickness | Min. 0.7mm | Min. 0.7mm | Min. 0.6mm |
| Panel length | Please consult us at design stage | Please consult us at design stage | Please consult us at design stage |
| Panel width | 100–530mm | 100–430mm. Standard width 430mm. | 100–430mm. Standard width 430mm. |
| Directions | Vertical and horizontal | Vertical and horizontal | Vertical and horizontal |
System build up
| Wall structure | Must consist of continuous wall studs or top hats at max. 600mm spacing. |
| Direct support | Plywood 17mm structural to AS 2269. |
| Underlay | Fully breathable and waterproofed membrane |
| Fixings | Fix flat lock clips at max. 300mm centres. Clips to be min 0.4mm stainless steel. |
Fully designed, build up system
Fully supported cladding system including plywood, membrane, metal and fixings, complete with all flashings, trims and waterproofed details meeting adjoining building materials.
| Warranty | Min. 15 years warranty |
| Materials | As detailed. Aluminium must be 3005 alloy with min H42 temper, PVDF coated with a primer and min two layer paint. |
| Installation | Recommended and approved installers only |
| Manufacture | CASA System’s state-of-the-art machinery has been specifically developed to work with non-ferrous precious metals. Our manufacturing facility has been purpose-built to roll form, fold, curve and pack materials in accordance with the requirements of these type of metals. Only metals formed in CASA System’s facility form part of the system to ensure full warranty. |
Installation & Warranty
Our systems are designed to be installed by experienced installers we know and trust, and the system warranty (minimum 15 years) applies to installations by CASA-approved installers. Talk to us early about who is installing. If you need an installer, we can recommend one.
Need the material too? We supply the zinc, copper or aluminium for every system we fabricate, so you get the system and the metal from one supplier.
Start your project
Send us your drawings or take-off and we will quote the material and fabrication together. Trade partners get prioritised fabrication.